Zum Inhalt springen

Minoura Flex


step
 Teilen

Empfohlene Beiträge

Minoura Flex - World's First Flexible Display Computer

 

Schaut ja ganz interessant aus...

Nächstes Jahr werma sehen was vom Hype noch übrig ist und wie gut das Teil dann in der Realität funktioniert :-)

 

FLEX features the following 18 functions even on the basic model:

 

  • Speed: Current / Maximam / Average / Pace Arrow
  • Cadence: Current / Maximum / Average
  • Time: Clock / Elapsed / Count-down
  • Distance: Odd / Trip1 / Trip2
  • Wattage: Current / Maximum / Average / Pace Arrow
  • Low Battery Alert

 

Speed is picked up from the rear wheel to enable you to use on any indoor trainer. Cadence is picked up from the left side crank arm.

Both data are transmitted in the latest 2.4GHz digital wireless system to the head computer on the stem.

 

Analog and 2.0GHz or lower digital wireless system usually cannot transfer the signal so long distance, so that they have to pick up the speed from the front wheel that is not acceptable for indoor training.

Also analog wireless system can handle only one signal and 2.0GHz or lower digital wireless system can carry up to two signals. Is it enough? Definetely, No. But FLEX can do everything!

 

How to mount FLEX?

 

It's quite easy. Just putting FLEX on your stem then hook the backside strap. That's all. It is no necessary to install any additional base bracket nor wiring from the sensor, because FLEX is the all-in-one package of CPU, display, wireless signal reciever and batteries. You can also mount FLEX on your wrist if you want!

The total length of FLEX is only 50mm so it can fit most stems sizing 90mm or longer.

 

More models in future?

 

Yes, the mid grade model (FLEX-HR) will be available by summer 2007. It features heart rate monitor transmitted in also digital wireless. FLEX-HR will be the world first triple-digital-wireless system (speed, cadence & heart-rate) nobody never do.

 

Also the top grade model (FLEX-HRS) is scheduled to be available by the end of 2007 which features 100% accurate power measurement system for much better analysis of your training.

 

Both additional features are upgradable. Also we are planning to add more useful and convenient functions on these models.

flex.jpg

flex-top.jpg

Link zu diesem Kommentar
Auf anderen Seiten teilen

Wenn sowas dann mal in die bikebrille integriert ist (als "see through"), wirds richtig interessant..

irgendwann kann man sich dann sein eigenes HMD bauen: einfach LCD/OLED Folie vor die Gucker pickn -> fertig! :D

najaaa....

 

bissi optik muss noch dazu, weil auf +15mm kann nicht einmal der kurzsichtigste programmierfuzzi scharf sehen ;)

 

also wenigstens ne fresnel linse oder so.. und dann wirds schon wieder ein bissl kniffelig..

Link zu diesem Kommentar
Auf anderen Seiten teilen

Dein Kommentar

Du kannst jetzt schreiben und Dich später registrieren. Wenn Du ein Konto hast, melde Dich jetzt an, um unter Deinem Benutzernamen zu schreiben.

Gast
Auf dieses Thema antworten...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Nur 75 Emojis sind erlaubt.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Editor leeren

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

 Teilen

×
×
  • Neu erstellen...