Zum Inhalt springen

daum USB Bluetooth-Adapter


Gast gfrast
 Teilen

Empfohlene Beiträge

Habe Probleme mit mit meinem USB Bluetooth-Adapter von daum. Besitze ein ergobike 8008 TRS und ergowin 2003 mit allen updates.

Ein freies Training über Bluetooth ist möglich nur kann ich kein Programm (Strecken) ausführen. Bekomme dann Fehlermeldung Cockpit antwortet nicht. Wer kann mir weiterhelfen. Mit dank im voraus!

Link zu diesem Kommentar
Auf anderen Seiten teilen

  • 2 Jahre später...

Schau mal da was Daum zur Kompatiblität zu seinen Produkten schreibt.

 

http://faq.daum-electronic.de/cgi-bin/faq.pl?faq_id=root0000

 

Datum 06.02.2009

 

Ist schon interessant, da wird was verkauft man kann aber nicht garantieren das es funktioniert.

 

Habe nähmlich selbst einen BT Adapter welcher an meine Run funktioniert an meinem Bike jedoch nicht, jetzt weiss ich wenigstens warum.!?

 

r

Link zu diesem Kommentar
Auf anderen Seiten teilen

  • 1 Jahr später...
Unfortunately I can´t write in German and I have to write in English which is very wrong language in this Daum world... Anyway, I just bought new laptop with Windows 8.1 and now I have no idea how to connect my Daum Premium 8i to my computer via old bluetooth adapter. I have original bluetooth adapter setup disk, but those drivers are for older Windows versions. I have done a lot of Google research but I can´t find any instructions in English. I would be very grateful if some of you could give some advices how to connect my Windows 8.1 laptop to Daum ergo via the bluetooth adapter. Thank you in advance!
Link zu diesem Kommentar
Auf anderen Seiten teilen

Unfortunately that didn´t work, but I found a page that shows how to connect bike directly to the computer, however, it didn´t work either. It looks that i´m totally lost, is there any English page with abc-instructions how to connect Daum and computer? I would like to use Ergoplanet software, unfortunately Ergoplanet pages are in German only.
Link zu diesem Kommentar
Auf anderen Seiten teilen

The Ethernet connection is by far the easiest and most reliable way to connect the P8i to a computer. Run a standard Ethernet cable from your router/switch to the Daum. The dialog in the P8i cockpit is in English assuming that you set it up that way.

 

The network connection of your P8i is independent of ErgoPlanet by the way. ErgoWin also uses the connection.

 

I can try to help if you get stuck. Don't worry about having to communicate in English. Many people on this forum have excellent English skills. They just prefer to use their mother tongue for most of their messages.

Link zu diesem Kommentar
Auf anderen Seiten teilen

yo_ca, thank you for offering help! I got that answer from Daum:

 

“Sorry , I have no instruction in english yet and I´m just updating a PC to have windows8 . So please wait further for informations. Maybe the attached info can help ( second page ).”

 

It looks like they have no idea how to use BT adapter in Windows 8 and I have to find out another way to connect my bike. Direct Ethernet connection is not possible at the moment (after couple of weeks it will be possible…) and I would like to connect ergo and pc via Ethernet cable, but I have failed so far. The following is from the attachment sent by Daum:

 

a ) LAN - ( Ethernet ) - Kabel direkt zum PC oder über Router bzw. Switch

 

Verbindung :

Ethernet - cross-over Kabel oder über Switch oder Hub mit Patch-Kabeln ;

LEDs an der LAN- Buchse des Cockpits leuchten

Netzwerk - Einstellungen am PC im System:

feste IP-Adresse z. B . 192.168.25.100 , Subnetzmaske 255.255.255.0

im Programm ergo_win premium pro/ ergo_win race edition :

feste Adresse aus der gleichen Gruppe wie PC , also z. B. 192.168.25.11 einstellen

Einstellungen am bike : menu > 3. Einstellungen > 2. Gerätedaten > 4. Fernsteuerung

Fernsteuerung : Ein

Fernsteuerung durch : Netzwerk

Bedienung sperren : Ein oder Aus

Kommunikationsprotokoll : Standard

Menu Netzwerk:

DHCP aktiv : nein

IP- Adresse gleich wie im PC-Programm , also z. B. 192.168.25.11 einstellen ;

Subnetzmaske 255.255.255.0 ; Gateway und DNS 0.0.0.0 b

 

As I have only some ideas about the text I have done the following (My computer ip-address is 192.168.000.190 and subnetmask 255.255.255.000):

 

In Ergoplanet settings/training devices/connection=network and /address is 192.168.000.191

 

in 8i settings/device data/remote control the values are:

- remote control on

- remote control by network

- lock system off

. communication protocol standard

 

In 8i settings/device data/network I have set the following values:

- DHCP activate, DHCP no

- IP address 192.168.000.191

- Gateway 000.000.000.000

- Subnetmask 255.255.255.000

- DNS server 000.000.000.000

 

But after all this all I get from Ergoplanet is this message:

 

“Cockpit connection failed, unable to connect ergo_bike (connect failed)”

 

It would be great help if you could check what is wrong in my settings, thank you once again!

Link zu diesem Kommentar
Auf anderen Seiten teilen

Hi,

the IP address of the PC and the 8i should not be the same, subnet must be the same.

 

These are the settings from Ergoplanet Wiki, http://wiki.ergoplanet.de/home/verbindung/premium-line

for PC-DAUM direct connection using a crossover cable.

 

PC: IP 192.168.0.1 Subnet-Mask 255.255.255.0

Daúm 8i: IP 192.168.0.2 Subnet-Mask 255.255.255.0

 

 

Regards

Paul

Bearbeitet von Paul12
Link zu diesem Kommentar
Auf anderen Seiten teilen

Verbindung :

Ethernet - cross-over Kabel oder über Switch oder Hub mit Patch-Kabeln ;

LEDs an der LAN- Buchse des Cockpits leuchten

Netzwerk - Einstellungen am PC im System:

feste IP-Adresse z. B . 192.168.25.100 , Subnetzmaske 255.255.255.0

im Programm ergo_win premium pro/ ergo_win race edition :

feste Adresse aus der gleichen Gruppe wie PC , also z. B. 192.168.25.11 einstellen

Einstellungen am bike : menu > 3. Einstellungen > 2. Gerätedaten > 4. Fernsteuerung

Fernsteuerung : Ein

Fernsteuerung durch : Netzwerk

Bedienung sperren : Ein oder Aus

Kommunikationsprotokoll : Standard

Menu Netzwerk:

DHCP aktiv : nein

IP- Adresse gleich wie im PC-Programm , also z. B. 192.168.25.11 einstellen ;

Subnetzmaske 255.255.255.0 ; Gateway und DNS 0.0.0.0 b

 

This part of your setup could actually be correct and working in your setup already, if you tested with Ergo Planet. You need to set up your training device in ErgoPlanet as well. My version of EP uses English dialogs so I'll give you those. It's: Settings / Training Devices / New or Edit the Default / Name - your choice / Premium / Bike / Network / the fixed IP address that you assigned to your Daum device when you followed the instructions above. Then return and check with test function in the same dialog box.

 

Connection

Use ethernet - x-over cable [those are often orange] from PC or normal Ethernet patch cable from router/switch

The LED's next to the LAN connector on the cockpit will light up when you have connected a cable that works.

 

Your settngs on the Daum look correct to me. Check on your router which addresses it is using for your network devices.

 

If you have a router [you probably do] and if your router is nearby and if your router still has a free ethernet connector, then you should probably avoid the x-over cable and run a cable from your router instead. It makes things much easier.

Bearbeitet von yo_ca
added
Link zu diesem Kommentar
Auf anderen Seiten teilen

  • 2 Wochen später...

Once again here which means still something is going wrong… I have tried with crossover cable and directly from router with normal Ethernet cable but all I get is this message by Ergoplanet:

 

http://img856.imageshack.us/img856/6884/h4z3.png

 

The light is on in my 8i cockpit:

 

http://img138.imageshack.us/img138/1239/witv.jpg

 

My computer ip is 192.168.0.13:

 

http://img836.imageshack.us/img836/6271/pdee.png

 

The 8i settings are the following:

 

http://img199.imageshack.us/img199/2421/z9yk.jpg

 

http://img822.imageshack.us/img822/166/3vmk.jpg

 

http://img43.imageshack.us/img43/124/b6fm.jpg

 

http://img843.imageshack.us/img843/398/rui7.jpg

 

And Ergoplanet settings:

 

http://img835.imageshack.us/img835/9489/xqo8.png

 

Now I’m wondering what is wrong? I have used Ethernet connection around 3 years ago and then it worked. Unfortunately I can’t remember my earlier settings…

Link zu diesem Kommentar
Auf anderen Seiten teilen

Thanks, I think that I went two steps forward but still something is wrong. I found out the following information from my router:

 

http://img547.imageshack.us/img547/5261/f1xl.jpg

 

Then I submitted the IP given for the ergo to EP:

 

http://img594.imageshack.us/img594/5313/oh57.png

 

I left ergo settings as they were, however, the result was the same old failure message from EP. Finally I did ping test and the result was following:

 

http://img833.imageshack.us/img833/6494/5n5y.png

 

No lost data, but destination host was unreachable. Is this an indication of some kind of problem?

5n5y.png

Link zu diesem Kommentar
Auf anderen Seiten teilen

You are much better off with a static IP address for your Daum device. You already have one device using a static IP address, so chances are good that you won't have much trouble doing it again fro the Daum.

 

The Settings of your Daum will also display the MAC address of the Daum. Most routers need that when you assign a Static IP address. So just get the Daum MAC address and go through the dialog for a new Static Address on the router. Use something like 192.168.0.20. That should be outside your routers DHCP range and otherwise safe.

 

Then enter that IP address in EP and test again.

Link zu diesem Kommentar
Auf anderen Seiten teilen

  • 4 Wochen später...

Das Problem hab ich auch schon des öfteren gehabt und die Lösung des Problems ist gar nicht so fern!!!!

Bei mir kam es auch öfters vor, dass während des trainings die Verbindung unterbrochen wurde.

wenn ich zb. offline geradelt bin und beim nächsten mal online fahren wollte, hatte ich keine Verbindung,( Dongel verschieb sich während des Fahrens) bis ich eines Tages auf die Idee kam den blöden bluetooth-dongel wieder richtig zu positionieren?

Einfach die B-Steckdose mit einer Zange etwas festdrücken und seid dem hab ich keine Probleme mehr:-)

Link zu diesem Kommentar
Auf anderen Seiten teilen

Dein Kommentar

Du kannst jetzt schreiben und Dich später registrieren. Wenn Du ein Konto hast, melde Dich jetzt an, um unter Deinem Benutzernamen zu schreiben.

Gast
Auf dieses Thema antworten...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Nur 75 Emojis sind erlaubt.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Editor leeren

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

 Teilen

×
×
  • Neu erstellen...